Categories
araldite
BOSCH POWER TOOLS
dewalt tools
fenner v belt
FUEL SHOES
HILTI FISCHER
INGCO TOOLS
metro tools
Stanley
Taparia Tools
LOCTITE
ABRO
Addison
Anabond
CUBE SPRAY
HOLESAW CUTTER
JUST SPRAY
M SEAL
MIRANDA TOOLS
SAFETY PRODUCT
TOTEM
WD 40 SPRAY
TOP RATED PRODUCTS
-
HSS TOTEM TAP SET 20MMX2.50MM
Original price was: ₹7,956.₹6,102Current price is: ₹6,102.
-
HSS TAPER SHANK DRILL BIT 24MM ADDISON (PACK 1PC)
Original price was: ₹5,972.₹2,466Current price is: ₹2,466.
-
HSS TAPER SHANK DRILL BIT 19MM ADDISON (PACK 1PC)
Original price was: ₹3,355.₹1,385Current price is: ₹1,385.
-
HSS TOTEM TAP SET 7/8
Original price was: ₹8,676.₹6,654Current price is: ₹6,654.
-
Reflective Tape white 2 inchx50mtr
Original price was: ₹1,200.₹650Current price is: ₹650.
-
Epoxy mortar FIS EB II
Original price was: ₹6,500.₹2,950Current price is: ₹2,950.
-
HOLESAW CUTTER 82MM
Original price was: ₹676.₹438Current price is: ₹438.
-
Soft faced hammer with handle SFH 20 (pack of 4pcs)
Original price was: ₹740.₹541Current price is: ₹541.
-
Loctite 406 Prism Instant Adhesive
Original price was: ₹1,200.₹250Current price is: ₹250.
-
Tiger-by Mallcom Lorex 6NO
Original price was: ₹2,200.₹885Current price is: ₹885.
LOCTITE® FREKOTE® 55-NC
Original price was: ₹12,000.₹9,500Current price is: ₹9,500.
Product category:
Mold release agents
Technologies:
-
Specialties, primers and coatings
-
Water-based adhesives, mixing (other except PVAC, acrylics and PUD)
Drying time between coats, @ 20.0 °C:
5.0 min.
Finish reflection:
Matte,Satin
Full cure time, @ 20.0 °C:
30.0 min.
Key characteristics:
Solvent based
Recommended for use with:
Composite: advanced composites,Fiberglass reinforced plastic (FRP)
LOCTITE® FREKOTE® 55NC is a clear, solvent-based, moisture-cured, semi-permanent release polymer with reduced odor. Specially designed to provide multiple release of advanced composites, FRP polyester parts and rotationally molded parts with no contaminating transfer or mold build-up, it can be wiped or sprayed on. Dry time between coats is just 15 minutes, and it creates a satin matt finish.
-
No mold build-up
-
For advanced composites, FRP & rotationally molded parts
-
No contaminating transfer
-
Satin matt finish
-
Manual or spray application
Related products
-
LOCTITE
Loctite 638 Retaining Compound
Sale!Original price was: ₹800.₹750Current price is: ₹750.
Add to cartDesigned for bonding cylindrical fitting parts, particularly with narrow bond gaps up to 0.25mm (0.01″). Great for a fast cure on all metals, including passive substrates like stainless steel. For a retaining compound offering high strength on all metals, including passive substrates, try LOCTITE® 638. You can expect high temperature performance and good oil tolerance, …
-
LOCTITE
Loctite 542 Thread Sealant
Sale!Original price was: ₹1,800.₹570Current price is: ₹570.
Add to cartLOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The thixotropic nature of LOCTITE 542 reduces the migration of …
-
LOCTITE
Loctite 641 Retaining Compound Red
Sale!Original price was: ₹1,500.₹890Current price is: ₹890.
Add to cartLOCTITE 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations. Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings
- Low Strength Bearing Retainer (1700 Psi)
- 150°C Service Temperature
- Fills Gaps upto 0.15mm
- Prevents loosening and leakage from shock and vibration
Features and benefits
- Prevents loosening: It fills all gaps between the cylindrical components and cures into a hard thermoset plastic. This unitizes the assembly and prevents loosening and leakage from shock and vibration
- Augments press fit
- Recommended for parts that will need subsequent dismantling, eg retention of bearings on shaft and into housing
Gap Fill Up to 0.15mm Shear Strength (N/mm2) 1700 psi (11.7) Temperature Resistance (Continuous) 150°C Cure Time (Setup/Full Strength) 20 min/24 hour Buy Loctite 641 Retaining Compound Red (50 ml) online in India at wholesale rates. If you have been looking for Loctite 641 Retaining Compound Red (50 ml) dealers, your search ends here as you can get the best Loctite 641 Retaining Compound Red (50 ml) distributors in top cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad and Ahmedabad. You can purchase Loctite 641 Retaining Compound Red (50 ml) of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the Loctite 641 Retaining Compound Red (50 ml) prices, you can be totally sure to get the best rates as Industrybuying brings you genuine Loctite 641 Retaining Compound Red (50 ml) rates and quality assured products only from the best of brands with exclusive brand discounts you won’t find anywhere else. Procure Loctite 641 Retaining Compound Red (50 ml) today and avail the best offers on your purchase.
-
LOCTITE
Loctite 55 Thread Sealing
Sale!Original price was: ₹2,000.₹780Current price is: ₹780.
Add to cartMaterial Plastic Brand Loctite Style Compact Item Weight 0.02 Kilograms Item dimensions L x W x H 50 x 60 x 120 Millimeters Compatible Material Plastic, Metal Global Trade Identification Number 04002872014013 Surface Recommendation Metal Manufacturer Loctite Country of Origin Czech Republic Model number SG150.55 Number of Memory Sticks 1 Item Weight 20 g Product …
MORE ABOUT US
Reviews
There are no reviews yet.