Categories

TOP RATED PRODUCTS
-
Loctite SI 596 RTV Silicone Sealant (300 ml)
₹2,500Original price was: ₹2,500.₹910Current price is: ₹910. -
drill bit 1.50mm to 6.50mm (13pc) miranda
₹1,959Original price was: ₹1,959.₹800Current price is: ₹800. -
HSS taper shank drill 3mm miranda (pack 1pc)
₹508Original price was: ₹508.₹180Current price is: ₹180. -
HSS DRILL BIT 14MM ADDISON (PACK 10PC)
₹19,107Original price was: ₹19,107.₹7,891Current price is: ₹7,891. -
Reflective 2inch Safety Jacket orange (Pack of 25pc)
₹3,500Original price was: ₹3,500.₹1,200Current price is: ₹1,200. -
ABRO PU Foam Insulation Sealant Off White, 750 ml
₹500Original price was: ₹500.₹345Current price is: ₹345. -
Anabond 10 ml Anabond Thread Locker
₹500Original price was: ₹500.₹250Current price is: ₹250. -
HSS DRILL BIT 8MM ADDISON (PACK 10PC)
₹4,870Original price was: ₹4,870.₹2,011Current price is: ₹2,011. -
HSS TOTEM TAP SET 4.5MMX0.75MM
₹1,257Original price was: ₹1,257.₹964Current price is: ₹964. -
FUEL Trendy Safety Shoes in Strong Knitted Fabric, Metallic toe cap (200 J) Toe with Rubber Sole
₹4,000Original price was: ₹4,000.₹1,850Current price is: ₹1,850.
TOP 4 PRODUCT
LOCTITE 401 LOCTITE 406 LOCTITE 415 LOCTITE 495



LOCTITE® FREKOTE® 55-NC
₹12,000 Original price was: ₹12,000.₹9,500Current price is: ₹9,500.
Product category:
Mold release agents
Technologies:
-
Specialties, primers and coatings
-
Water-based adhesives, mixing (other except PVAC, acrylics and PUD)
Drying time between coats, @ 20.0 °C:
5.0 min.
Finish reflection:
Matte,Satin
Full cure time, @ 20.0 °C:
30.0 min.
Key characteristics:
Solvent based
Recommended for use with:
Composite: advanced composites,Fiberglass reinforced plastic (FRP)
LOCTITE® FREKOTE® 55NC is a clear, solvent-based, moisture-cured, semi-permanent release polymer with reduced odor. Specially designed to provide multiple release of advanced composites, FRP polyester parts and rotationally molded parts with no contaminating transfer or mold build-up, it can be wiped or sprayed on. Dry time between coats is just 15 minutes, and it creates a satin matt finish.
-
No mold build-up
-
For advanced composites, FRP & rotationally molded parts
-
No contaminating transfer
-
Satin matt finish
-
Manual or spray application
Related products
-
LOCTITE
Loctite 609 Retaining Compound
₹1,500Original price was: ₹1,500.₹570Current price is: ₹570.Add to cartHigh strength methacrylate ester acrylic retaining compound designed for the bonding of cylindrical fitting parts. LOCTITE® 609 is a green, high strength methacrylate ester acrylic retaining compound designed for the bonding of cylindrical fitting parts. The product cures in the absence of air between close fitting metal surfaces. Typical applications include rotor to shafts in …
-
LOCTITE
Loctite FREKOTE 770-NC Release Agent (3.78 L)
₹35,000Original price was: ₹35,000.₹24,500Current price is: ₹24,500.Add to cartClear, solvent-based, moisture-cured, epoxy mould release agent for advanced composites and FRP polyester parts. LOCTITE FREKOTE 770NC is a clear, solvent-based, moisture-cured, epoxy mould release agent for advanced composites and FRP polyester parts. It is a versatile, semi-permanent release agent with high thermal stability that provides high slip where mould geometry problems are encountered. …
-
LOCTITE
Loctite 454 Instant Adhesive Gel
₹3,500Original price was: ₹3,500.₹975Current price is: ₹975.Add to cartLOCTITE 454 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. The gel consistency enables overhead and vertical application. Gel Type Adhesive Ideal for …
-
LOCTITE
Loctite 565 PST Thread Sealant
₹1,800Original price was: ₹1,800.₹1,065Current price is: ₹1,065.Add to cartLOCTITE® 565 is a white, one-part pipe sealant that provides instant seal for air pressure testing. It is designed for locking and sealing of tapered metal pipe threads and fittings. As anaerobic-curing thread sealant paste cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and …
MORE ABOUT US







LINKS
STORE ADDRESS
Address : Second floor, 3406 Gali Bajrang Bali, Murghan Sita Ram Bazar Delhi-110006
Call : 8800934781,
9711443134
Email : kapilrajput8762619@gmail.com
support@kiranonlinemarketing.com
INDIA
- DELHI
- UTTAR PRADESH
- HARIDWAR
- RAJASTHAN
- MUMBAI

araldite
BOSCH POWER TOOLS
dewalt tools
fenner v belt
FUEL SHOES
HILTI FISCHER
INGCO TOOLS
metro tools
Stanley
Taparia Tools
LOCTITE
ABRO
Addison
Anabond
CUBE SPRAY
HOLESAW CUTTER
JUST SPRAY
M SEAL
MIRANDA TOOLS
SAFETY PRODUCT
TOTEM
WD 40 SPRAY





Reviews
There are no reviews yet.