Categories
TOP RATED PRODUCTS
-
HSS DRILL BIT 20MM ADDISON (PACK 10PC)
₹33,851Original price was: ₹33,851.₹13,980Current price is: ₹13,980. -
Pidilite WD-40, Multipurpose Spray, Lubricant, Rust Remover, 170gm
₹400Original price was: ₹400.₹250Current price is: ₹250. -
HSS taper shank drill 12mm miranda (pack 1pc)
₹1,642Original price was: ₹1,642.₹581Current price is: ₹581. -
BRONZE GOLD
₹350Original price was: ₹350.₹175Current price is: ₹175. -
CUBE SPRAY ORANGE 400ML
₹300Original price was: ₹300.₹110Current price is: ₹110. -
HSS taper shank drill 24mm miranda (pack 1pc)
₹6,191Original price was: ₹6,191.₹2,191Current price is: ₹2,191. -
safety helmet orange
₹200Original price was: ₹200.₹110Current price is: ₹110. -
FLUORESCENT VIOLET
₹300Original price was: ₹300.₹200Current price is: ₹200. -
HSS Parallel shank jobber series bit 19mm miranda ( pack of 10pc)
₹24,833Original price was: ₹24,833.₹9,376Current price is: ₹9,376. -
HSS TOTEM TAP SET 5/32
₹1,221Original price was: ₹1,221.₹936Current price is: ₹936.
TOP 4 PRODUCT
LOCTITE 401 LOCTITE 406 LOCTITE 415 LOCTITE 495




Loctite 574 Flange Sealant (50 ml)
₹2,500 Original price was: ₹2,500.₹1,500Current price is: ₹1,500.
LOCTITE 574 seals close-fitting joints between rigid and semi-rigid metal faces and flanges. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.
- Fills Gaps upto 0.25mm
- 150°C Service Temperature
- Better flexibility and improved adhesion
- High Oil Resistance
- Higher strength on contaminated surfaces
- High performance on passive metals without an activator
Features and benefits
- Prevents leakage: It fills all gaps between the mating flange parts and cures into a hard thermoset plastic that fills all surface irregularities providing 100% seal
- Ideal for rigid and semi-rigid flanges eg. cast iron components, pump housing, gearbox and engine casing
- Adapts to flange surface irregularities and scratches up to 0.25 mm
- Eliminates gasket compression set
- Reduces inventory cost and complexity as one tube can make many different shapes and sizes of gaskets
- Provides resistance to low pressure immediately after seal
Gap Fill | Up to 0.25mm |
Temperature Resistance (Continuous): | 150°C |
Cure time | 24 hours |
Buy Loctite 574 Flange Sealant (50 ml) online in India at wholesale rates. If you have been looking for Loctite 574 Flange Sealant (50 ml) dealers, your search ends here as you can get the best Loctite 574 Flange Sealant (50 ml) distributors in top cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad and Ahmedabad. You can purchase Loctite 574 Flange Sealant (50 ml) of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the Loctite 574 Flange Sealant (50 ml) prices, you can be totally sure to get the best rates as Industrybuying brings you genuine Loctite 574 Flange Sealant (50 ml) rates and quality assured products only from the best of brands with exclusive brand discounts you won’t find anywhere else. Procure Loctite 574 Flange Sealant (50 ml) today and avail the best offers on your purchase.
Related products
-
LOCTITE
Loctite 567-50ml
₹800Original price was: ₹800.₹700Current price is: ₹700.Add to cart Buy NowLOCTITE® 567™ is a white, 1-part thread sealant designed for the locking and sealing of tapered metal pipe threads and fittings. As an anaerobic-curing thread sealant, it cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. It’s high lubricating properties prevent galling on stainless steel, aluminum and all other metal pipe threads and allow ease of disassembly. The product offers high temperature performance and oil tolerance. It tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids.
- One component – clean and easy to apply
- Doesn’t creep, shrink or block systems
- Ideal for metal pipes and fittings
- UL MH8007 & ULC MH27131 Classified
- Certified to ANSI/NSF Standard 61 for potable water systems
- Provides an instant low pressure seal
-
LOCTITE
LOCTITE® FREKOTE® 55-NC
₹12,000Original price was: ₹12,000.₹9,500Current price is: ₹9,500.Add to cart Buy NowProduct category:
Mold release agents
Technologies:
-
Specialties, primers and coatings
-
Water-based adhesives, mixing (other except PVAC, acrylics and PUD)
Drying time between coats, @ 20.0 °C:
5.0 min.
Finish reflection:
Matte,Satin
Full cure time, @ 20.0 °C:
30.0 min.
Key characteristics:
Solvent based
Recommended for use with:
Composite: advanced composites,Fiberglass reinforced plastic (FRP)
-
-
LOCTITE
Loctite 415 Instant Adhesive (20 g)
₹2,100Original price was: ₹2,100.₹330Current price is: ₹330.Add to cart Buy NowLOCTITE® 415 is a transparent, colorless, high viscosity instant adhesive. Well suited to metals and suitable for rubbers and plastic. Also suitable for polyolefins when used with primers.
Key Features:-
- Cures very quickly when confined between two surfaces.
- Ideal for bonding small to medium-size parts.
- Excellent adhesion to most substrates.
- Well suited to metals.
- Fixture time of 20-40 secs.
- Solvent-free.
- Suitable for rubbers and plastics.
- High viscosity.
Buy Loctite 415 Instant Adhesive (20 g) online in India at wholesale rates. If you have been looking for Loctite 415 Instant Adhesive (20 g) dealers, your search ends here as you can get the best Loctite 415 Instant Adhesive (20 g) distributors in top cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad and Ahmedabad. You can purchase Loctite 415 Instant Adhesive (20 g) of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the Loctite 415 Instant Adhesive (20 g) prices, you can be totally sure to get the best rates as Industrybuying brings you genuine Loctite 415 Instant Adhesive (20 g) rates and quality assured products only from the best of brands with exclusive brand discounts you won’t find anywhere else. Procure Loctite 415 Instant Adhesive (20 g) today and avail the best offers on your purchase.
-
LOCTITE
Loctite 518 Gasket
₹2,500Original price was: ₹2,500.₹1,050Current price is: ₹1,050.Add to cart Buy NowLOCTITE 518 is designed for use on rigid iron, aluminum, and steel flanged mating surfaces. Fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Typical applications include sealing close fittings on transmissions, motor housings etc. Fills Gaps upto 0.25 mm Better Flexibility 150°C Service Temperature Gasketing Compounds …
KIRAN ONLINE MARKETING
“Established in the year 2019, KIRAN ONLINE MARKETING in Chawri Bazar, Delhi is a top player in the category Cutting Tool Dealers in the Delhi. This well-known establishment acts as a one-stop destination servicing customers both local and from other parts of Delhi. Over the course of its journey, this business has established a firm foothold in it’s industry.
CONNECT WITH US
BIG SALE DISCOUNT
-
WD-40 Multipurpose Cleaning Spray 420 ml
₹420Original price was: ₹420.₹300Current price is: ₹300. -
Screw driver set 821 (pack of 10pc)
₹2,650Original price was: ₹2,650.₹1,938Current price is: ₹1,938. -
FLAT WHITE
₹350Original price was: ₹350.₹175Current price is: ₹175. -
HOLESAW CUTTER 54MM
Rated 1.00 out of 5₹468Original price was: ₹468.₹303Current price is: ₹303.
Reviews
There are no reviews yet.